Titanium Forged Rings

Titanium Forged Rings are mainly used to make compressor parts of aircraft engines, followed by structural parts of rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys have been used in general industry, such as electrodes for electrolysis industry, condensers for power stations, heaters for oil refining and seawater desalination, and environmental pollution control devices. Titanium Forged Rings have become a kind of corrosion-resistant structural materials. In addition, it is also used to produce hydrogen storage materials and shape memory alloys.

Rolled ring forging is a process that works with several different materials, all with their own advantages.

Rolled ring forging is a process that starts with a circular metal preform that has been pierced to form a doughnut shape. The ring is heated and rotated to reduce its wall thickness and increase its diameter.

Including titanium seamless rolled rings, forged rings, and casted rings

The process for seamless rolled forged rings involves cutting a hole out of the forging material and rolling it into a thin ring. The rolled forged rings offer concentrically improved rings with smooth surfaces as compared to plate burn-outs, or butt welded rings.

Forgings

Rolling

Machining

Crack Detection

Products description

· Standard: ASTM b381

· Material: GR1 Gr2 GR5 GR7 GR12 GR9 GR23

· Delivery status: annealed state (m) hot working state (R) cold working state (y) (annealed, ultrasonic flaw detection)

· Packing: in cartons or wooden cases

· Surface treatment: polishing, chamfering

· Surface quality: the surface roughness Ra value of the two end faces shall not be greater than 3.2l μ m (subject to the requirements of ultrasonic inspection), the surface roughness Ra value of the inner and outer sides shall not be greater than 12.5 μ m (Ra value shall not be greater than 3.2 μ m when ultrasonic testing is required for the outer circumferential surface), and the chamfer radius shall be 5-15mm. The surface of the product shall be free from cracks, folds, double skin and other visible defects. Local surface defects can be removed by grinding, and the cleaning depth shall not exceed the dimensional tolerance, and the minimum allowable dimension shall be ensured. The ratio of cleaning depth to width shall not be greater than 1:6 at both ends and 1:10 at inner and outer sides. The outer surface should be grinded along the axial direction.

· Surface finish: clean, dust-free, better acid resistant service life.

· Test: mechanical properties, chemical composition test, ultrasonic testing.

Welcome to send an inquiry to  at any time if you need.

Why Choose Us

1. Quality advantage

Baoji Chenyuan Metal Material Co., Ltd. is located in the center of "China Titanium Valley". It has been supplying grade five titanium rods in stock for many years.Titanium forging factory production, sponge titanium materials, material ratio in line with international standards.

2. Equipment advantages

Complete supporting equipment, the introduction of the industry's top roller drawing equipment and inspection and testing equipment, to ensure product output and quality stability. There are 800T fast forging press, 1T air hammer, 2T ingot furnace, annealing furnace, cold drawing machine, precision forging machine, grinder, planer, smelting furnace, etc.

3. Technical advantages

Focus on titanium and titanium alloy forging for more than ten years, master the domestic first-class titanium forging technology

4. Product advantages

Titanium rod, target, titanium plate and other large amount of stock, can provide samples, can be processed and customized according to the drawings.

5. Price advantage

Source factory production, no middleman, more reasonable price.

6. Quality assurance

The quality system is complete and operates normally to ensure that each process is produced according to the regulations, and the product performance can be produced after passing the test by the third-party testing agency. Provide material list, if customer needs, can provide third party test report.

7. Qualification advantages

Baoji Chenyuan metal materials Co., Ltd. has passed the ISO 9001-2015 certification.

FAQ:

Q: How long is your delivery time?

A: If it's available, it's usually 3-5 days. If the goods are out of stock, 5-7 days. Customize the special needs, renegotiate the construction period, and deliver the goods as soon as possible

Q: What are your terms of payment?

A: Up to $1000, 100% in advance. Payment > US $1000, 30% telegraphic transfer in advance, the balance paid before delivery.

Q: How do you guarantee the quality?

A: we'll send someone to deliver the products with the factory certificate. And if necessary, we can also conduct third party inspection on the products.

http://www.cynfm.com/